Lowrance Yamaha Engine Interface Cable

Yamaha engine interface cable 4.5 m (15 ft) and T-connector

Yamaha® Engine Connection for NMEA 2000® Messages

Many Yamaha outboard engines have the ability to output engine data to a NMEA 2000® network. This output from the engine can be displayed on Navico Multi-Function Displays such as the Lowrance HDS, Lowrance LMF-200 and 400 gauges, the Simrad NSS/NSE/NSO the B&G Zeus as well as NMEA 2000 Compatible displays from other manufacturers. The vessel must be equipped with an existing or new NMEA 2000® network (backbone) or one must be installed. (See Buy Together Tab above)

Connects to Yamaha engines without Yamaha CommandLink Plus system.

2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250.
2006 & newer: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300.

Outputs:
Yamaha 4-Stroke 50-250 | 2-Stroke HDPI 150-350 (Z or VZ models)

RPM
Alternator
Voltage
Engine Hours
Engine Temperature
Fuel Pressure
Fuel Rate
Oil Pressure
Trim*
Water Pressure

*Digital trim must be connected by a Yamaha dealer.

*Requires NMEA 2000 network. Kit includes T-connector to connect to a new or existing NMEA 2000 network. Add NMEA 2000 starter kit, part number 000-0124-69, if a network is not already installed.

Works with: NMEA 2000 Compliant Units